The Brophy Bumper Spare Carrier part # BR56VR is approved for use at the rear of a motorhome like you have and as long as the wheel is less than 17-1/2 inches in diameter it would work well in that regard as well. view full answer...
According to California Towing Code #29003: Every hitch, drawbar, coupler or other connection between motor vehicles towing must be securely attached to the vehicle and be strong enough to handle the weight of whatever you are towing.
So, you will need safety chains like the # RM3230 which are designed for use with your Andersen Ultimate 5th Wheel hitch # AM3200 view full answer...
Brake controller wiring adapter # 3034-P is the correct one to use to install a Tekonsha/Draw-Tite aftermarket trailer brake controller like the P3 # 90195 in your 2016 Ford F-350 cab and chassis. This adapter has a black connector on one end that plugs in to the controller itself and the other end has a grey connector that plugs in to the port under behind the dash panel for the factory unit. You can see this process in the linked video at the 4:35 mark. view full answer...
I believe are asking about the distance from the brackets to the top of the receiver with the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15845.
That measurement is 6", as you can see from the accompanying photo. This hitch is a confirmed fit for a 2019 Ford F-350 cab and chassis. view full answer...
Since you are going to be using this on a boat trailer, I definitely recommend HydraStar. Their actuators are built of extruded anodized aluminum for corrosion resistance, have weathertight seals protect internal components, and include marine-grade gaskets and stainless steel hardware, so they are designed for use with boat trailers.
With that being said, we do not have a plug and play kit available for drum brakes at the moment, but we do have a kit that includes everything you need.... view full answer...
Since you changed out the motor on your MaxxAir MaxxFan and neither the old nor new motor are working I recommend using a circuit tester like # PTW2993 to verify that the motor is getting power.
If you find that the motor is getting power then it is likely that the operator mechanism is broken not allowing the lid to open and keeping the motor from turning on.
Let me know if the motor has power, and also send me the model number of your fan and I would be happy to recommend the correct... view full answer...
For your motorhome that is built around a Ford F-350 cab and extended chassis I suggest a kit designed for severe duty.
For your front axle you can use Timbren kit # TFF550SDH which works on both 2WD and 4WD models. This kit installs without drilling and will help stiffen your front suspension through its progressive resistance. For a rear axle kit you can use # TFR350TTCC which also fits both 2WD and 4WD versions. Both install in place of the factory bump stops.
The kit you referenced,... view full answer...
To reach the connector, first locate the notch in the access panel in the center of the dash, near the passenger side. Using a trim panel puller, carefully pry the panel out and undo the locking tabs to remove the panel. You will find the mating connector behind this portion of your dashboard.
See picture for more info. For a trim panel tool we have the part # ALL648544. A small slot screwdriver will work too.
If you fast forward to the 4:45 mark of the attached linked video you can see... view full answer...
The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2176 is compatible with your 2019 F-350 Cab and Chassis model. I confirmed with Firestone this fits both 2WD and 4WD Cab and Chassis models.
I also recommend using the Air Lift Load Controller Compressor System for Air Helper Springs- Heavy Duty - Single Path # AL25854 to adjust your suspension at any time. view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1116 you currently have is only designed to fit 2017 - 2022 Ford Super Duty trucks. Since your new department truck is a 2023 F-350 you need the kit # BW73FR instead.
I checked the parts included in each kit to see if you would just need new brackets or just a new main body portion between the model years but it looks like both the mounting brackets and the main body are all different parts between... view full answer...
Sounds like you're just needing a roof rack for your 2017 Ford F-350 so you can use your bike rack. We actually do have Thule options for you! You just need to use one of the 60" crossbar options listed below along with the Evo Clamp Feet # TH710501 and the Fit Kit # TH145177:
60" Crossbars
WingBar Evo Black - # TH711520
WingBar Evo Silver - # TH711500
SquareBar - # TH712500
Don't forget to add lock cores for your roof rack with the 4-Pack # TH450400, or using the 6-Pack # TH450600 or... view full answer...
34 inch wide trailer frame indicates you have a cab and chassis F-350, which we do have solutions for that. But if you have an RV built on a F-350 frame then we don't have a fit that I can guarantee will fit since the rears of those are quite a bit different in dimensions than most vehicles and vary from motorhome to motorhome.
The # 41947 will fit a 2017 F-350 Cab and Chassis and it is a Class IV hitch though. If your Ford isn't a motorhome this would be a great option.
The other option... view full answer...
I'll start out by saying that going with larger wheel and tire combo will not increase the GVWR of your 2019 Thor Four Winds motorhome. In situations like this, your vehicle is rated for the maximum weight that the frame, engine and components are safely rated for without risking damage to the frame or engine.
If you wanted to upgrade to a larger wheel and tire combo, the Westlake # LHAS701 is a Load Range H tire that will provide you with a bit stronger tire and better handling, but... view full answer...
The Stovetop Silencer # CAM43704 is meant to be used while traveling in your RV. It has a non-skid backing to keep it from sliding but if you were to hit a bump that was bad enough it could bounce a little. I do not think that it would bounce so much as to fall off though. I have included a link to a video review for you. view full answer...
The B&W Rubber Cover for Stowed Turnoverball # BWGNXA1710 will not fit on the bottom of the Turnoverball unit. You don't want moisture to be held in, so putting a plug on the underside wouldn't be recommended even if it did fit. You want moisture to drain out of the socket. The hitch pin is designed to resist corrosion and the assembly is powder coated to resist corrosion as well. The cover is a great option for when the ball is flipped and it actually fits the underside of the ball... view full answer...
There are two different plugs for the B&W Turnoverball Gooseneck Trailer Hitch, the part # BWGNXA1710 which attaches to the hitch ball assembly and covers the opening in the bed while the hitch ball is in the stowed position and the part # BWGNXA1715 which covers the opening in the bed with the hitch ball assembly removed. These are the only two plugs that B&W offers for the B&W Turnoverball Gooseneck Trailer Hitch. view full answer...
Since your 2015 Ford F-350 Cab and Chassis does not have the factory towing package you will need two wiring harnesses to add a 7-way connector. The first is the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead item # C58044. This harness will splice into your F-350's lights directly behind the tail light housing. The wire configuration will be:
Yellow - Left turn/brake
Green - Right turn/brake
Brown - Tail lights
White - Ground
The 2nd harness you will need... view full answer...
The correct air bags for a 2022 Ford F-350 Cab and Chassis are the Firestone Ride-Rite Air Helper Springs part # F2176. These will do a great job of helping to provide additional support, improving stability, and smoothing out the ride. They have a 4,800 lb weight capacity and they are made here in the USA. view full answer...
Yes. The Adco Deluxe RV Windshield Cover # 290-2507 is designed to fit on Class C motorhomes, including the 2020 Ford E-350 chassis of the Thor Four Winds 25V. This will do a great job of keeping the windshield protected from the elements and other objects that may damage it during storage.
I've linked a review video of this cover for you to check out, as well. view full answer...
I do have an option for you but there aren't any confirmed fit air bag options for a 2016 Ford F-350 Cab and Chassis. The only options we have are upgraded jounce springs. The most popular of which and what I recommend using is the Timbren Rear Suspension Enhancement System part # TFR350CC. These offer a bolt-on install and will work great to provide extra support when towing or hauling. view full answer...
Go To Results